Importance of installing anti-corrosion oil tanks for skid-mounted gas stations

For skid-mounted gas stations, installing anti-corrosion oil tanks is equivalent to extending the service life. This is mainly because the oil tank is absolutely the main and most important component of the entire skid-mounted gas station system. Other supporting facilities except the oil tank are located on the ground, while the oil tank is located underground. Therefore, due to the influence of the environment, the importance of anti-corrosion oil tanks is affected. Let's take a closer look.

1. The installation, use and maintenance of the equipment must be carried out in accordance with relevant regulations of our country.

2. The anti-corrosion storage tank should avoid strong impact and collision on the equipment body during the installation process.

3. Because the material of the all-plastic flange is softer than that of the steel plate, the user should check the sealing function of the storage tank equipment before use, and add liquid to check whether it leaks. For storage tanks containing chemical liquids, use water to test for leaks to prevent loss.

4. Anti-static equipment should be installed when the anti-corrosion storage tank contains high-resistance organic solvents.

5. The reception on the equipment should use acid-proof gaskets and seal them, and replace the gaskets in time.

6. The filling and output of the equipment must be opened to prevent the equipment from being damaged by pressure.

7. Pipes and accessories connected to the equipment should avoid their weight acting directly on the equipment. When lifting, the receiving and manhole on the equipment shall not be used as the fulcrum.

8. When storing chemicals in the tank, the stored items should be clearly marked. There should be outstanding drainage trenches and dilution equipment near the place where the tank is placed.

9. The anti-corrosion tank is a normal temperature and pressure tank. The operating temperature of the steel-plastic composite tank is -40-98, and the operating temperature of the polyethylene all-plastic tank is -40-60.

The above nine points specifically introduce the importance of anti-corrosion oil tanks for skid-mounted gas stations, and I hope it will be helpful to everyone.